Free Sample Baby Adults Products MBPP Wet Wipes Professional China
Wet Wipes Manufacturers
Product Description:
Double-knit polyester fiber with cold knife cut edge;
Pre-wetted with specified IPA/DI Water concentrations to a 38%
saturation level;
Available in both reusable pail packaging and refill pack
packaging;
The pre-wet solution increases both cleaning efficiency and
cleaning protocol consistency;
Very low levels of particles, fibers, ions and extractables;
High abrasion resistance;
Application:
• Cleanroom production equipment and environmental surfaces for
reduction of particulate contamination
• Ideal for cleaning environmental cleanroom surfaces during and
following the production flow
• Suitable for wiping of production equipment
requiring low solvent extractable and low particle generation
Technical Data:
| Attribute; (units) | Value ** | Test Method |
| | |
| Basis weight; nominal (g/m2) | 120 | MSD-QI-QS-007 A0 |
| Absorbency in water | | IEST-RP-CC004.3 |
| Intrinsic; (mL/g) | 2.41 | |
| Extrinsic; (mL/m2) | 290 | |
| Sorptive rate; (seconds) | 1 | IEST-RP-CC004.3 |
| Non-volatile residue, NVR | | IEST-RP-CC004.3 |
| In deionized water; (g/m2) | 0.014 | |
| In isopropanol; (g/m2) | 0.012 | |
| Specific ions | | IEST-RP-CC004.3 |
| Sodium; (ppm) | 0.025 | |
| Chloride; (ppm) | 0.076 | |
| Potassium; (ppm) | 0.094 | |
| Particles, readily releasable | | |
| APC:≥0.3μm(Ea/ft3) | 92 | IEST-RP-CC003.3 |
| LPC:≥0.5μm(106/m2 ) | 16 | IEST-RP-CC004.3 |
Benefits:
Excellent chemical compatibility.
Applies IPA efficiently while minimizing VOC emissions.
Exceptionally clean.
Available in resealable pouches and zipper packs.
Material:
• 100% Polyester
• Microfiber(70%Polyester and 30% Nylon)
• 100% Melt-blown fabric(PP)
• 55%Woodpulp and 45% Polyester
Technical Data:
The data is based on the polyester material.
Cleanroom Environment:
• ISO Class 3 – 8
Shelf Life:
• Non-Sterile (Dry) –3 years from date of manufacture
• Non-Sterile (Pre-Wetted) – 2 years from the date of manufacture
• Sterile – 2 years from the date of manufactue
Features:
1.Pre wetted wiper can control the amount of solvent released on
the surface of the object,in line with the requirements of wiping;
2.It can reduce the amount of solvent and its evaporation,so that
the solvent is controllable;
3.Healthier and safer working environment,reduce the release of
volatile organic compounds, greatly reduce environmental pollution;
4.It can reduce the fire and its potential harm caused by solvent
leakage
5.Reduce the generation of particles and fibers, reduce in the
spray painting, sealing, welding, paint construction of defective
products, so that the wiping process is more standardized,
eliminate the replacement of operators, bring aboutthe uncertainty
of product quality control, greatly reduce the cross pollution in
the process of cleaning.
